ABI Error Message

0JA:	CERT OF MFR NOT FOUND

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE CM (CERT MFGR) NUMBER IS IN PROPER FORMAT BUT DOES NOT EXIST FOR THE CM PORT INDICATED.

486:	INVALID CONSIGNEE NUMBER FORMAT

CONSIGNEE NUMBERS TRANSMITTED TO ABI MUST BE IN ONE OF THE FOLLOWING FORMATS:  IRS OR EIN NUMBER: NN-NNNNNNNXX SSN: NNN-NN-NNNN CUSTOMS ASSIGNED NUMBER: YYDDPP-NNNNN N = NUMERIC CHARACTER; X = ALPHANUMERIC CHARACTER (EXCEPT FOR THE LETTERS "O", "I", "Z"); YY= LAST TWO DIGITS OF THE CALENDAR YEAR IN WHICH THE NUMBER WAS ASSIGNED. ANY OTHER FORMAT THAN ONE OF THE ABOVE WILL BE REJECTED WITH THIS MESSAGE.

LU2:	INVALID LUMBER PERMIT TYPE

THE SOFTWOOD LUMBER PERMIT TYPE IS TRANSMITTED IN THE 40 REC, POS 70-72. IT IS MANDATORY FOR MERCHANDISE ENTERED UNDER ONE OF THE FOLLOWING TARIFF NUMBER SUBHEADINGS OF 44071000, 44091020, OR 44091090 WITH PROVINCE OF ORIGIN CODES: XA, XC, XO, OR XQ. POS 70 OF THE 40 REC MUST CONTAIN EITHER "A", "B", "C", OR "D." IF POS 70 CONTAINS "A", "B", OR "C", THEN POS 71-72 MUST CONTAIN ZEROES OR SPACES. IF POS 70 CONTAINS "D", THEN POS 71-72 MUST CONTAIN A TWO-CHARACTER NUMERIC CODE THAT FALLS WITHIN THE RANGE OF 01 THROUGH 20, DEPENDING ON THE CALENDAR QUARTER DURING WHICH THE PERMIT IS ISSUED. SEE ADMIN MESSAGE 97-0579 FOR MORE INFORMATION ON LUMBER PERMITS.

DKD:	D12 RECORD MUST CONTAIN DATA

THIS ERROR MESSAGE COULD BE THE RESULT OF A DRAWBACK DISKETTE OR ABI DRAWBACK PROBLEM. IT IS SAYING THAT WHEN CUSTOMS FORMATTED THE RECORDS FROM THE DRAWBACK DISKETTE OR WHEN THE DATA WAS SENT VIA ABI, NO DATA WAS PRESENT IN THE GIVEN RECORD. IF THE DISKETTE HAS NO DATA, THE PC PROGRAM SHOULD STOP IT BEFORE TRANSMISSION; HOWEVER, THERE MAY HAVE BEEN DATA THERE, BUT IT WAS BAD DATA.

IN2:	ENT/PROC FILER CODE CONFLICT

THIS MESSAGE IS GENERATED IN RESPONSE TO A SELECTIVITY RESULTS QUERY INPUT (APPLICATION IN). IF THE FILER CODE OF THE ENTRY NUMBER TRANSMITTED IN THE R1 INPUT RECORD DOES NOT AGREE WITH B RECORD FILER CODE, THIS ERROR MESSAGE WILL RESULT.

51D:	INFORMAL ENTRY IS NOT PERMITTED

SINCE MARCH OF 1994 THE REQUIREMENT FOR MAKING FORMAL ENTRY ON A GIVEN TARIFF NUMBER HAS BEEN INDICATED IN THE ON-LINE HARMONIZED TARIFF RECORD. THE FIELD CONTAINING THIS INFORMATION IS CALLED "MIS-REQ". THERE ARE (3) VALID VALUES FOR THIS FIELD: "0" = FORMAL ENTRY REQUIRED, REGARDLESS OF VALUE "2" = FORMAL ENTRY REQUIRED FOR VALUE GREATER THAN $250 "Z" = TARIFF NOT ELIGIBLE FOR DUTY-FREE TREATMENT UNDER 'FREELY ASSOCIATED STATES' (FAS) PROGRAM. IF A RECORD CONTAINS A "0" AND "2" THE "0" CONDITION APPLIES. THIS ERROR MESSAGE WILL BE GENERATED IF A TARIFF NUMBER ON THE ENTRY IS CODED "0" AND THE ENTRY TYPE IS INFORMAL. IF THE TARIFF NUMBER IS CODED "2", ERROR MESSAGE Z29 WILL APPLY.

12O:	INVALID FIRMS CODE

THE FIRMS CODE MUST BE 4 ALPHA NUMERIC CHARACTERS IN LENGTH.

VK7:	HLD: FIELD NAME FORMAT INVALID

A BMS MAP FIELD NAME OPERAND MUST BE EXPRESSED AS A VALID COBOL CONSTRUCT. OCCURRENCES ARE SUPPORTED AND SHOULD FOLLOW THE FIELD NAME BRACKETED WITH PARENTHESIS. EX. BMSNAME (02) REFERENCES THE SECOND OCCURRENCE.

AER:	ERROR IN A 32 REC; RLSE 5

THIS MESSAGE FOLLOWS A MORE SPECIFIC ERROR MESSAGE (I.E. "1F5 RELEASE NOT ON FILE") IN A CONSOLIDATED ENTRY SUMMARY TRANSACTION. IT NOTIFIES THE FILER THAT THE ERROR IS IN THE FIFTH RELEASE IN THE 32 RECORD.

40L:	SPI INVALID FOR COUNTRY OF ORIGIN

SPECIAL PROGRAMS THAT REDUCE OR ELIMINATE DUTY ARE NOT APPLICABLE TO EVERY COUNTRY OF ORIGIN THAT MAY APPEAR ON AN IMPORT TRANSACTION. GSP (SPI "A") APPLIES ONLY TO THOSE COUNTRIES LISTED AS BENEFICIARY DEVELOPING COUNTRIES; ANDEAN PREFERENCE (SPI "J") APPLIES ONLY TO THOSE COUNTRIES CODED AS ELIGIBLE FOR THAT PROGRAM. THE SPECIAL PROGRAMS DATABASE LISTS WHICH COUNTRIES ARE ELIGIBLE FOR VARIOUS SPECIAL PROGRAMS. IF A SUMMARY INPUT CONTAINS A SPECIAL PROGRAM INDICATOR WHICH IS NOT APPLICABLE TO THE TRANSMITTED COUNTRY OF ORIGIN, THIS ERROR MESSAGE WILL BE GENERATED. NOTE: IF THE LINE HAS TWO TARIFF NUMBERS, BOTH OF WHICH ARE NAFTA ELIGIBLE, THE SPI'S USED MUST AGREE WITH THE COUNTRY OF ORIGIN. IF THE FILER USES "CA" FOR THE SPI IN EITHER THE 50 OR 70 RECORD, WITH "MX" IN THE 40 RECORD AS C/O, THIS MESSAGE WILL ALSO BE GENERATED. SEE ERROR MSG 40J, AS WELL.

RBN:	RCN FLR NOT PERMIITED IN LOCATION

FOR RECONCILIATION, THE FILER IS A LICENSED BROKER AND IS NOT PERMITTED IN LOCATION WHERE THE RECON IS BEING FILED.

VHN:	DT HS7:INVALID APP LTR/ORD CERT

THE NHTSA LETTER/OR OFFICIAL ORDERS FIELD IS REPRESENTED BY THE LETTER "Y" POSITION 35 OF THE DT01 RECORD. NO OTHER CHARACTER CAN BE TRANSMITTED OR THIS ERROR MESSAGE WILL RESULT.

95A:	21 REC REQ'D FOR SINGLE ENT BOND

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION (APPLICATION EI). EFFECTIVE JANUARY 1, 1999, ENTRY SUMMARIES WHICH REFLECT A SINGLE TRANSACTION BOND TYPE (CODE = 9) MUST ALSO CONTAIN A 21 RECORD TO REPORT THE BOND AMOUNT AND THE BOND PRODUCER IDENTIFICATION NUMBER. UNTIL JANUARY 1, 1999, FILERS MAY TRANSMIT SUMMARY DATA WITHOUT THIS RECORD, HOWEVER.

681:	CUSTOMS REL VIA EREL ON FILE

THIS ERROR MESSAGE OCCURS WHEN A FILER ATTEMPTS TO SEND SELECTIVITY DATA FOR AN ENTRY THAT HAS BEEN PREVIOUSLY RELEASED. A FILER WILL RECEIVE THIS MESSAGE WHETHER THE RELEASE OF THE ENTRY NUMBER WAS VIA A "PAPERLESS" MESSAGE OR "DOCS REQUIRED".  IN THE LATTER CASE, ONCE THE ON-LINE PROCESSING HAS BEEN COMPLETED, A RETRANSMISSION OF THE CARGO DATA WILL GENERATE THIS MESSAGE AT THE TIME OF HI TRANSMISSION.

VEM:	FC 740:QTY EXCEEDS 03 ALLOWANCE

THE QUANTITY FOR AN 03 IMPORT CONDITION NUMBER CANNOT EXCEED 200 UNITS WITHOUT PRIOR APPROVAL. IF QUANTITY EXCEEDS 200, REPORT PRIOR APPROVAL BY SENDING A "Y" IN POSITION 7 OF THE FC01 RECORD, DATA ELEMENT "03 IMPORT CONDITION NUMBER QUANTITY APPROVAL".

VDE:	INCORRECTLY ESTIMATED MPF SURCHRG

THE CORRECT MPF SURCHARGE FEE IS $3.00 USING COLLECTION CLASS CODE "500".THIS FEE IS REPORTED IN ABI RECORDS 34, 89 AND 90.

VKX:	HLT: POS&LEN EXCEEDS FIELD LENGTH

THE LENGTH VALUE SPECIFIED IN THE OPTIONAL POSITION/LENGTH PARAMETER EXCEEDS THE TOTAL LENGTH OF THE FIELD. THE LENGTH MUST FIT WITHIN THE FIELD BEGINNING FROM THE SPECIFIED POSITION.

DKO:	CANADIAN TRAILER OUT OF SEQUENCE

THIS MESSAGE MEANS THAT THE NAFTA IMPORT ENTRY TRAILER SEQUENCE NUMBERS (00001-99999) ARE OUT OF SEQUENCE (E.G.:00001,00003,00002 INSTEAD OF 00001, 00002, 00003) (DRAWBACK MODULE).

DKZ:	TARIFF NOT ONFILE

THIS MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE. THE MESSAGE SIMPLY MEANS THAT THE NUMBER, AT THE 6, 8, OR 10 DIGIT LEVEL DOES NOT EXIST ON THE TARIFF FILE. NORMALLY, THIS OCCURS WHEN THE FILER HAS GIVEN 10 DIGITS ON OLDER RECORDS. FOR OLDER RECORDS, IF THE FILER USES 6 DIGITS (OR 8 IF PETROLEUM) THE PROBLEM IS MINIMIZED.

VAP:	FIRMS REQUIRED FOR CERTIFICATION

A FACILITIES INFORMATION AND RESOURCES MANAGEMENT SYSTEM (FIRMS) CODE IS IS REQUIRED FOR ANY ENTRY SUMMARY INPUT THAT REQUESTS CARGO CERTIFICATION IN THE 3O REC, POS 38. THE FIRMS CODE IS TRANSMITTED IN THE 20 REC, POS 72-75. IF THE FIRMS CODE IS OMITTED, THIS ERROR MESSAGE WILL BE GENERATED.

EIM:	PARTY NAME REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C08 RECORD IDENTIFIES THE VARIOUS PARTIES RELATED TO THE INSTANT INVOICE. A TWO-ALPHA CHARACTER PARTY QUALIFIER IS TRANSMITTED IN THE C08 REC, POS 4-5. FOR ALL PARTY QUALIFIERS EXCEPT "IM" AND "UC", A NAME AND ADDRESS ARE ALSO REQUIRED TO BE TRANSMITTED IN THE C09-C11 RECORDS. IF THE NAME ELEMENT IN THE C09 REC, POS 4-38, IS LEFT BLANK, THIS ERROR MESSAGE WILL BE GENERATED.

66A:	IMPORTER IS INACTIVE

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE DATA INPUT TRANS- ACTION (APPLICATION HI). IF THE IMPORTER NUMBER (H1 REC, POS 20-31) IS IN 'INACTIVE' STATUS ON THE IMPORTER DATABASE, THIS ERROR MESSAGE WILL BE GENERATED. TO REACTIVATE, THE FILER MUST SEND AN "ADD CF5106" TRANSACTION WITH THE IMPORTER'S FULL NAME AND ADDRESS INFORMATION.

14K:	ENTRY DATE RESTRICTION

THE ENTERED DATE IS NOT WITHIN THE BEGINNING AND ENDING DATE BOUNDS AS SHOWN IN THE TARIFF FILE.

746:	LINE ITEM VALUE MISSING

THIS MESSAGE OCCURS WHEN ZEROES OR SPACES ARE SENT FOR THE VALUE IN POSITIONS 8-17 OF THE 40 RECORD OR POSITIONS 69-78 OF THE 70, 80 OR 81 RECORDS IN A "9802" TRANSMISSION. IN OTHER TYPES OF TRANSMISSIONS, SENDING SPACES OR ZEROES WILL YIELD AN 800 ERROR MESSAGE "NO MATCH FOR ESTIMATED COMP DUTIES" OR IN THE CASE OF GSP OR LDDC, A WARNING MESSAGE 28E "CENSUS OR-LO VALUE/QUANTITY."

79J:	TARIFF SEQUENCE NUMBER ERROR

A BREAK OCCURRED BETWEEN TARIFF LINES. IN ABI, A CARGO RELEASE INPUT TRANSACTION WAS SENT WITH NO TARIFF NUMBER IN THE H5 REC, POS 8-17. THIS MESSAGE WILL OCCUR FOR ANY LINE WITHOUT A TARIFF NUMBER EVEN IF OTHER LINES ON THE INPUT CONTAIN VALID TARIFF NUMBERS.

 Next 10 >>Showing results 1 to 25 of 1405